Splash apparatus
|
Detailed Product Description
|
Splash apparatus
In addition, appliances, except those marked IPX5 and IPX6, are
subjected for 5 min to the following splash test. The apparatus shown in Figure 104 is used. The appliance is placed
in normal position of use and adjustable feet shall be set in
accordance with the instructions for use to the
most unfavourable height. For appliances normally used on the floor, the bowl is placed on
the floor and is moved around in such a way as to splash the
appliance from all directions. During the test, the water
pressure is so regulated that the water splashes up 150 mm
above the bottom of the bowl. The bowl is not positioned underneath the appliance. For all other appliances, the bowl is placed on the same plane
where the appliance is placed and is moved around in such a
way as to splash the appliance from all directions. During
the test, the water pressure is so regulated that the water
splashes up 100 mm above the bottom of the bowl. The bowl is not positioned underneath the appliance. Care is taken that the appliance is not hit by the direct jet.
|
| Product Tags: IP testing splash apparatus waterproof testing equipment splash resistance test device |
Related Products
|
Splash apparatus |
|
JIS D 0203 Rain Test Equipment for Automotive Parts |
|
JIS D0203 Rain And Spray Tester For Automobile Parts , IP Testing Equipment For Automotive Parts |
|
JIS D0203 Rain Spray Tester 1000x1000x1000mm for Auto Parts |
|
High Performance 4 Ports IP Testing Equipment for Data Rate Testing with AC/DC Power Supply |
|
ISO 20653 IEC 60529 IP Testing Equipment Waterproof Ingress Protection |
Email to this supplier