Miniature Force Sensor With Internal Thread Female Threaded Load Cell

Miniature Force Sensor With Internal Thread Female Threaded Load Cell

Tension compression rod end load cell FLRA is designed with an internal threaded hole on each side of the transducer, this allows it to be easily embedded into machinery or test equipment. Miniature tension compression force sensor FLRA is made from stainless steel and offers M4 / M5 / M6 / M8 / M10 five mounting options. Internal threaded load cell FLRA is available in 100N / 200N / 500N / 1kN / 2kN / 5kN / 10kN seven rated capacities for bidirectional force measurement and it can be customized according to customer requirements.

Dimensions

Specifications

Miniature Force Sensor With Internal Thread Female Threaded Load Cell

Instruction of load cell output:

Load cell output: = (Power supply * Rated output) * Load / Capacity
Rated output of Rod End Load Cell FLRA is around 1.5mV/V.
Power supply of Rod End Force Sesnor FLRA is within 3-12V.
Load / Capacity is within 0-1.
So the output range of Female Threaded Load Cell FLRA is normally within -18mV...+18mV for pull and push force measurement.
Example: Internal threaded rod end load cell FLRA-500N with 1.5mV/V sensitivity powered by 10V DC, the output range is -15mV...+15mV.

A signal conditioner can be used with the load cell to deliver -5~5V, 0-10V or 4-20mA output.

Example: Compression And Tension Load Cell FLRA-2kN working with -10-10V amplifier, the Force-Voltage relationship will be 0-2000N push force VS 0-10V output, 0-2000N pull force VS 0-(-10V) output, which is linear regardless of the measurement error.

Miniature Force Sensor With Internal Thread Female Threaded Load Cell

Click here to download data sheet