2lb Small Single Point Load Cell 1lb Miniature Weight Sensor 10oz
Small Size Single Point Load Cell FMHD is strain gauge based to
deliver 1.0mV/V output from full wheatstone bridge. Small size
weight sensor FMHD offers 10oz / 1lb / 1.5 lbf / 2lb four rated
capacities to choose from,high accuracy with maximum 0.05%
non-linearity of the full capacity. The 1000 ohms resistance strain
gauges used are more energy-efficient compared to commonly used 350
ohms gauges. The compact size and aluminum material makes FMHD
weighs only about 7 grams which makes it suitable for weight
measuring applications where total mass and mounting space matters.
Micro load cell transducer FMHD offers a perfect mixture of small
size,high accuracy and low cost,which makes weight sensor FMHD
suitable for weight monitoring in consumer electronics.You may find
weight transducer FMHD applicable for home appliances, force
simulators, process control, robotics, automotive and so on.
Forsentek is also capable of and willing to provide custom made
service if you cannot find suitable weight/load/force measurement
sensors from the standard product portfolio.
Dimensions:
Specifications
| Rated capacity | 300g / 3N / 10 ozf 500g / 5N / 1 lbf 750g / 7.5N / 1.5lb 1000g / 10N / 2 lb |
| Rated output | 1.0 mV/V |
| Excitation | 3-10 V |
| Zero balance | ±0.1mV/V |
| Nonlinearity | ±0.05% of the capacity |
| Hysteresis | ±0.05% of the capacity |
| Nonrepeatability | ±0.05% of the capacity |
| Creep(3min) | ±0.1% of the capacity |
| Safe overload | 120% of the capacity |
| Ultimate overload | 150% of the capacity |
| Operating temperature | -10...+40oC |
| Temperature shift zero | ±0.03% of R.O./oC |
| Temperature shift span | ±0.02% of R.O./oC |
| Input resistance | 1050±100 ohms |
| Output resistance | 1000±10 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP62 |
| Material of element | Aluminum |
| Cable | 32AWG*180mm |
| Wiring code | Red--Excitation+ Black--Excitation-
Green--Signal+ White--Signal- |
Brief instruction of load cell rated output(or Sensitivity) and
output range:
Definition of rated output: The signal produced by load cell(or
force transducer) when rated load is applied, expressed in terms of
mV/V. The rated output indicates the output signal range of a
sensor.
Loadcell output = (Power supply * Rated output) * Load / Capacity
Rated output of micro single point load cell FMHD is normally
within 1mV/V.
Power supply of miniature beam type load sensor FMHD is normally
within 3-10V.
Load / Capacity is within 0-1.
So the output range of light weight sensor FMHD is normally
within -10mV...+10mV.
Example one: Micro Load Cell Transducer FMHD-500g with 1.0mV/V
sensitivity powered by 3.3V DC,the output range is 0~3.3mV.
Example two: Miniature Weight Sensor FMHD-300g with 1.0mV/V
sensitivity powered by 10V DC,the output range is 0~10mV.
10oz Small Single Point Load Cell 1 lb Miniature Weight Sensor
2 lbf
Click here to download datasheet
