251 - 260 of 279
textiles horizontal flammability tester
Selling leads
|
Building Materials Flame Spread Testing Equipment Product Introduction BS 476 part 6 specifies a method of test, the result being expressed as a fire ...
2024-12-09 18:39:54
|
|
FAA Aircraft Materials Fire Test Handbook, Chapter 5 Tester for Rate of Heat Release OSU Heat Release Rate Tester.pdf Ⅰ. (Introduction) This Tester is ...
2024-12-09 20:03:25
|
|
...Flammability Tester is used for conductor diameter greater than 8mm (cross-sectional area greater than 0.5mm2) or less than 8mm (cross-sectional ...
2024-12-09 18:11:34
|
|
...Tester is its Sample Clamping Angle of 45 Degree, which allows for accurate and reliable testing of materials. Additionally, the Volume Of Chamber ...
2024-12-09 23:57:37
|
|
VW-1 Flammability Tester Product Description The VW-1 combustion tester is produced in strict accordance with UL standards It fully complies with the ...
2024-12-09 23:18:12
|
|
Creases Recovery Tester Product information The ability of textiles to recover from creases is determined by measurement of its crease recovery angle. ...
2024-12-09 18:24:24
|
|
3500W NBS Plastic/ Rubber Smoke Density Testing Machine ISO 5659-2:2006 Product Description (note: Other unspecified or conflicting GB/8323.2-2008 ...
2024-12-09 18:04:05
|
|
ISO 5659-2 Plastic Smoke Density Testing Machine Overview The plastic burning smoke density tester is a new test equipment for measuring smoke density...
2024-12-09 18:07:25
|
|
Building Material Burning or Decomposition Smoke Density Testing Machine Technical standards ASTM D2843, DIN4102 standard requirements Technical ...
2024-12-09 18:38:58
|
|
Cone Calorimeter Application Suitable for testing the heat release rate of building materials. Standard: ISO5660-1:2002 Technical Parameters Power ...
2025-07-14 00:06:58
|