1 - 10 of 188
single flame source test equipment
Selling leads
|
Building Material Flammability Test Furnace with Touch Screen Control Description The building materials flammability test furnace is in the normal ...
2025-07-09 00:07:12
|
|
Building Material Flammability Test Furnace with Touch Screen Control Description The building materials flammability test furnace is in the normal ...
2025-07-09 00:07:12
|
|
Building Materials Flame Spread Testing Equipment Product Introduction BS 476 part 6 specifies a method of test, the result being expressed as a fire ...
2024-12-09 18:39:54
|
|
Computerized Single Column Lab Testing Equipment Servo Tensile Testing Machine Main functions of lab testing equipment: This machine is suitable for ...
2024-12-09 21:28:06
|
|
... ISO 11925-2. Test results of the building structure can be classified according to standard 13501-1. The dimensions of the test specimens shall be ...
2025-07-09 00:07:12
|
|
...Flame Test Chamber Application Applies to check the section area more than 0.5mm2 of single insulation wire and cable vertical flame propagation ...
2024-12-09 18:03:30
|
|
... and smoke release when the cables are subjected to a flaming ignition source. (It is nothing to the purpose of cables, such as the electric power, ...
2024-12-09 18:03:30
|
|
Single Insulated WIre and Cable Vertical Flame Test Equipment , Specimen Length 600 ± 25mm Description of the instrument IEC 60332 Single Insulated ...
2024-12-09 18:11:34
|
|
... were tested in a sealed oven with a radiant heat source of 2.5 w/cm2. Beam attenuation tests were performed under open flame and non-flame ...
2024-12-09 18:02:18
|
|
...Single Cable Vertical Flammability Tester Product introduction Single Cable Combustion Tester is the most widely used and lower cost of cable fire ...
2024-12-09 18:03:30
|