61 - 70 of 1219
50hz flammability testing equipment
Selling leads
|
... the fire resistance of roofs and components.Under this circumsance of A1.82m,B 2.4m and C 3.9m to grade A~C grade for evaluating the sample. At ...
2024-12-09 18:02:53
|
|
... ISO 11925-2. Test results of the building structure can be classified according to standard 13501-1. The dimensions of the test specimens shall be ...
2025-07-24 00:09:05
|
|
...Flammability Tester are of high precision, ensuring that the burning gas is supplied at a consistent rate throughout the test. This feature ...
2024-12-09 23:57:37
|
|
... 97738 Specification 1. Ambient temperature: -10 ℃ ~ 30 ℃ 2. Relative humidity: ≤85% 3. Power supply voltage and power: 220V ± 10% 50HZ power less ...
2024-12-09 18:27:44
|
|
|
...Flammability Tester with MCU Control Application Suitable for laboratory conditions under the ISO 845: 1985 measured by the density of less than ...
2024-12-09 18:30:49
|
|
...test non-flammability of the main components of homogeneous building products under specific conditions. Technical parameters The maximum ...
2024-12-09 18:27:44
|
|
...Flammability Testing Equipment Standards According to the clause 1060 (vertical burning and FT1 test), 1061(cables burning test), 1080(VW-1 burning ...
2024-12-09 18:03:30
|
|
...burning characteristics of materials. The standard uses the same principle as the corner fire test and the cone calorimeter. The test scale is ...
2024-12-09 20:12:06
|
|
IEC61034 Wires & Cables Smoke Density Test Room / Flammability Test Equipment Application Applies to check the size quantity of producing smoke of ...
2024-12-09 18:00:17
|
|
...Flammability Tester Product introduction Single Cable Combustion Tester is the most widely used and lower cost of cable fire performance test ...
2024-12-09 18:03:30
|