171 - 180 of 186
single flame source flammability tester
Selling leads
|
... area is greater than 0.5mm2) or less than 8mm (section area less than 0.5mm2) of single wire and cable flammability evaluation. Suitable for ...
2024-12-09 12:16:31
|
|
... to a flaming ignition source in a graded radiant heat environment, within a test chamber. It can also be used to measure this same critical ...
2025-07-28 00:13:28
|
|
... Drop Tester Melt Flammability Tester can be used for more than 5mm thickness of rigid and elastic material performance evaluation, and it is ...
2024-12-09 12:57:32
|
|
...er a condition in the absence of external radiation to direct impact of vertically placed samples with a small flame to determine the flammability ...
2025-12-25 00:49:25
|
|
... performance of curtains and other hanging fabrics, suitable for single or multi-layer fabrics. It is not suitable for fabric densities greater ...
2024-12-26 23:35:50
|
|
...single-flame source test. Test apparatus corresponds to standard EN ISO 11925-2. Test results of the building structure can be classified according ...
2025-09-17 00:19:17
|
|
... source. It is applicable to fabrics or other materials used in curtains, draperies or other window treatments and single-layer fabrics and ...
2024-12-09 12:04:01
|
|
...Testing Instrument/IEC 60695-2-10 Glow Wire Test Apparatus Glow Wire Tester Introduction Glow wire tester is a simulation experiment project using ...
2024-12-09 19:57:04
|
|
... test method is within the stipulated time, to standardize the flame was carried out on the sample surface combustion, the combustion of standard ...
2024-12-09 13:35:58
|
|
ASTM D1929 Ignition Temperature Testing Equipment For Plastic Sample Intruduction Plastic ignition temperature tester according to GB4610-2008 plastic ...
2024-12-26 23:35:49
|