ASTM D1929 Ignition Temperature Testing Equipment For Plastic Sample
|
Detailed Product Description
|
ASTM D1929 Ignition Temperature Testing Equipment For Plastic Sample
Intruduction
Plastic ignition temperature tester according to GB4610-2008
plastic hot air furnace method of determining the ignition
temperature plastic ignition temperature tester design and
manufacture, in full compliance with GB4610-2008, while meeting the
requirements of ISO871-2006 standards, used to assist in testing
the burning and flame retardant properties of plastic materials. GB4610-2008 version of the ignition temperature tester test
principle. In the heating chamber of the hot air furnace, with different
temperature heating samples, with a small flame in the furnace
above the opening directly on the escaping gas, in order to
determine the flash ignition temperature. The self-ignition
temperature is determined in the same way as the flash ignition
temperature, but without the flame applied. The main technical parameters of the ignition temperature tester
are 1. custom-made ceramic tube with inner diameter of 100mm ±5mm,
length of 240mm ±20mm and temperature resistance of not less than
750℃. 2. inner tube inner diameter 75mm ±2mm, length 240mm ±20mm,
temperature resistance not less than 750℃. 3. butane igniter flame height 10mm-20mm can be adjusted
arbitrarily. 4. the furnace temperature can be constant at any temperature
between (150-750)℃. 5. equipped with a flow meter to precisely control the gas flow 6. the insulation layer consists of more than 60mm thick thermal
insulation mineral wool, wrapped with stainless steel outside. 7. 3 thermocouples and temperature meters to detect the temperature
of the furnace and the temperature of the specimen. 8. specimen container made of stainless steel. 9. timer accuracy 0.01s, time recording range: 0 ~ 999.9S
(presettable). 10. automatic temperature control program 11. ambient temperature: room temperature～40℃; ambient humidity:
≤75%. 12. operating voltage: AC 220 V ± 10V 50HZ; using power: 2500W. 13. temperature control accuracy: ±2℃, adjustable between
150℃~750℃. 14. display accuracy: ± 0.5 ℃. 15 equipment size: test furnace 400 × 250 × 300, controller 430 ×
350 × 280mm long 16. equipment weight: 15Kg. Design standards: GB4610-2008 plastic hot air furnace method for
the determination of the ignition temperature Equivalent standard: ISO871-2006
Specification:
Ambient temperature:room temperature ~ 40 ℃ Display accuracy:± 0.5 ℃ Dimensions:test furnace (0.4*0.4*0.5) m Voltage:AC 220 V ± 10V 50HZ About us If you are interested in any of our products or would like to
discuss a custom order. Please feel free to contact us. We are looking forward to forming succesful business with new clients around the world in the near future. |
| Product Tags: ASTM flammability test for fabric Plastic Sample Temperature Testing Equipment D1929 Ignition Temperature Testing Equipment |
Related Products
|
ASTM E2058 Fire Propagation Apparatus with 31 kW Propane Sandbox Burners for Heat Release Rate Measurement |
|
UL94 Flammability Tester with 0–500 ℃ Test Temperature, Adjustable Air Flow and ±1 ℃ Temperature Accuracy for Plastic Rubber Electronic Materials |
|
YYF008 Surface Flame Spread Test Apparatus Building Material Flame Spread Tester |
|
ISO9239 Compliant Critical Radiant Flux Tester with 2KW Total Power and 300mm × 450mm Radiant Panel for Flooring Heat Flux Testing |
|
EN 13823 Compliant Single Burning Item Test Apparatus with 31 kW Propane Burners and Built-in Smoke Density Measurement |
|
Plastic Horizontal Burning Rate Test Apparatus with Adjustable Burner Angle Stainless Steel Construction and Sealed Toughened Glass Observation Window |
Email to this supplier