51 - 60 of 1261
combustion wire testing equipment
Selling leads
... Testing Equipment for Halogen Acid Gas Release of Cable Introduction: Halogen Acid Gas Tube Furnace is used to test the acidity of the gas that ...
2024-12-09 12:04:10
|
...Testing Equipment ISO 871 Plastic Ignition Temperature Tester Description: Decompose and release the combustible gas from plastic material under ...
2024-12-09 12:04:01
|
... flame and burned a certain time,to measure the minimum temperature of the material.Application comparison within material through the testing ...
2024-12-09 12:04:01
|
...Testing Equipment Products: Large furniture calorimeter is based on GB / T 20286-2006 requirements in Appendix B and C of R & D production; the ...
2024-12-09 13:35:58
|
Iso 5660 Cone Calorimeter Test Apparatus, Fire Resistance Testing Equipment Introduction: Cone calorimeter is a new generation of polymer material ...
2025-07-21 00:08:56
|
... for single or multi-layer fabrics. It is not suitable for fabric densities greater than 700 g/m2 (21 oz/yd2 ). Specification 1. open combustion ...
2024-12-26 23:35:50
|
...Combustion Test Apparatus Application: Test the heat of combustion of building materials in the oxygen bomb calorimeter with constant heat capacity...
2024-12-09 12:04:01
|
...combustion. Fire Resistance Tester is designed according to the requirements of IEC60331-11, and used to obtain the refractory characteristics of a ...
2024-12-09 12:04:01
|
...Using electricity heating regulation material (Ni80 / Cr20) of resistance wire (Φ 4 mm Ni-Cr alloy wire) to 0°C~ 1000°C in 1 min, then with 1.0 N ...
2024-12-09 13:35:58
|
... whether keep circuit integrity under fire conditions. Standards: GB/T19216 Test for electric or optical fibre cables under fire conditions--...
2024-12-09 12:04:01
|