321 - 330 of 383
src040 shank rc drill bit
Selling leads
|
Product description In Top Hammer Drilling the hammer produces a percussive force on the drill rods or tubes, which is transmitted to the drill bit. ...
2024-12-09 12:42:08
|
|
...Drilling System Product Specification: ODEX Eccentric Overburden Drilling System, starting with the ODEX90 to suit 114mm O.D. casings to ODEX280. ...
2024-12-09 12:11:48
|
|
...drilling systems are widely used in a variety of applications from well drilling and mining to rock anchoring and site investigation. Sollroc ...
2024-12-09 12:46:28
|
|
Product description Product introduction: A down-the-hole drill, usually called DTH is mainly a pneumatic powered rock or ground drill, in which the ...
2024-12-09 12:57:59
|
|
...Shank QL40 DTH Drill Hammer with Special Steel for Underground Mining Product Description: DTH drilling is very simple method for the operators for ...
2024-12-09 18:14:14
|
|
...Shank MP35 Hammer For Surface Mining And Well Drilling Technical parameter MP35 DTH hammer: shank MP35 Length(less bit) 881mm External diameter ...
2024-12-09 13:08:32
|
|
... (less bit) 487kg (1071lbs) Hole range 305mm-445mm Working pressure 10-25bar Impact rate at 1.7 Mpa 16Hz Recommended rotation speed 15-25 r/min Air ...
2024-12-09 12:11:40
|
|
... pin Weight (less bit) 100kg Hole range 155mm-203mm Working pressure 10-35bar Impact rate at 1.7 Mpa 23Hz Recommended rotation speed 20-30 r/min ...
2024-12-09 12:11:40
|
|
...cutting orsample is formed.The drilled sampledoes not have to travel the length of the hammer where contamination and loss of sample takes place. ...
2024-12-09 12:11:48
|
|
Tubeless Down The Hole Hammer 10 Inch Hammer Without Footvalve For Shank SD10 Future: 1. Deliver maximum energy to drilling bit, fast drilling speed ...
2024-12-09 12:11:48
|