1 - 10 of 109
ul test finger
Selling leads
|
...UL Test Finger Probe Hazardous Moving Parts Probe for Fan Blades Introduction Hazardous moving part probe is conforms to the standards of UL507 ...
2024-12-09 18:22:24
|
|
... figure 9.1 (PA160). It is applied to test the accessibility to hazardous moving parts such as access to fan blades through a fan finger guard. The ...
2024-12-09 18:22:24
|
|
...Test Probe Kit Contains Jointed Finger Probe Rigid Test Finger Ball Pressure Test Apparatus ect. The PG-60950 contains the devices listed in the ...
2024-12-09 18:44:06
|
|
Test Finger Probe with 125mm Stop Meet the requirement of IEC60335-2-14 Introduction The test finger probe is designed according to IEC60335, GB4706.1...
2024-12-09 18:22:24
|
|
... 7 and UL clauses. This probe may be used to verify the protection of persons against access to hazardous parts, and to verify the mechanical ...
2024-12-09 18:35:34
|
|
...Figure 12 of the IEC 61032 (Test probe 18) and is used to simulate a children human finger. It is also used by the standards of CSA, IRAM, UL. IEC ...
2024-12-09 18:28:53
|
|
... to verify adequate clearance from hazardous parts. Object probe: a test probe simulating a solid foreign object to verify the possibility of ...
2024-12-09 18:22:24
|
|
...Testing Equipment UL Test Rod Probe meet the requirements of UL982 Standard 1. Introduction of UL Test Rod Probe The UL test rod probe is designed ...
2024-12-09 18:49:01
|
|
.... The standard test finger probe is intended to verify the basic protection against access to hazardous parts and also be used to verify the ...
2025-07-30 00:07:26
|
|
...Test Finger Probe and Short Test Pin Probe The test finger probe and short test pin probe are designed according to IEC61032 standard. The test ...
2024-12-09 19:16:17
|