91 - 100 of 118
ul test finger
Selling leads
|
20N / 1N Test Probes According to IEC60884-1 Figure 9 and Figure 10 for Socket - Outlet 1. Introduction of Socket-outlet test probes: The probes are ...
2024-12-09 18:22:24
|
|
IEC60598-1 1.1m Test Chain Made by 63% Cu and 37% Zn with CNAS Calibration Certificate 1. Introduction of Test Chain: Test chain is designed according ...
2024-12-09 18:22:24
|
|
75g Fragmentation Test Hammer with Tungsten Carbide Tip for Glass According to IS015717 1. Introduction The test hammer for fragmentation test having ...
2024-12-09 19:01:16
|
|
Φ8mm Cylindrical Rod Test Probe for Blender as Per IEC60335-2-14 clause 20.102 1. Introduction The Φ8mm cylindrical rod test probe is designed to meet ...
2024-12-09 22:53:48
|
|
Wedge Probe Designed according to IEC60950 for Paper Shredder Inlet 1. Introduction Wedge probe is designed according to UL60950 figure NAF.2 and NAF...
2024-12-09 18:22:24
|
|
IEC61032 Test Probe 31 Test Cone Made by Nylon Third - Lab Calibration Certificate Available Introduction: It is designed according to IEC61032 figure ...
2024-12-09 18:22:24
|
|
Hardened Steel Pin with Tip Radius R0.25 and 30N Force According to IEC60335-1 clause 21.2 1. Standard Conforms to : IEC60950 clause 2.10.8.4 and ...
2024-12-09 18:54:54
|
|
Test Probe 41 Conforms to IEC61032 and IEC60065 with CNAS Certificate Introduction: It is designed according to IEC61032 figure 16, and meet the ...
2024-12-09 18:22:24
|
|
... Y.5.3/ figure Y.2, meets the requirement of UL498, UL1598, UL153, UL154B, UL103, UL8750, UL1741, UL514B, UL1278, UL1571 and etc. The water spray ...
2024-12-09 19:26:34
|
|
... A for IP1X test is intended to verify the protection of persons against access to hazardous parts. Test probe B for IP2X test is intended to ...
2026-07-31 00:40:11
|