81 - 90 of 109
ul articulated finger probe
Selling leads
|
...Probe B with 50mm Circular Stop Face 1. Introduction Similar test probe B is designed to meet the test requirements of IEC60335-1 clause 20.2, the ...
2026-06-28 00:15:53
|
|
...Probe B with 125mm Circular Stop Face for Verifying the Stability and Mechanical Hazards of the Kitchen Machines 1. Introduction Similar test probe ...
2026-06-28 00:15:53
|
|
IEC60601-1 Test Probe Kits for Verification to Openings in Enclosures of ME equipment 1. Introduction The test probe kits are meet the requirement of ...
2026-06-28 00:15:53
|
|
...-2-100 figure 1 and IEC50636-2, it is simulate the young adult finger to check the protection against to hazardous moving parts of hand-held mains...
2026-06-28 00:15:53
|
|
Test Probe 41 Conforms to IEC61032 and IEC60065 with CNAS Certificate Introduction: It is designed according to IEC61032 figure 16, and meet the ...
2024-12-09 18:22:24
|
|
20N / 1N Test Probes According to IEC60884-1 Figure 9 and Figure 10 for Socket - Outlet 1. Introduction of Socket-outlet test probes: The probes are ...
2024-12-09 18:22:24
|
|
Wedge Probe Designed according to IEC60950 for Paper Shredder Inlet 1. Introduction Wedge probe is designed according to UL60950 figure NAF.2 and NAF...
2024-12-09 18:22:24
|
|
IEC61032 Test Probe 31 Test Cone Made by Nylon Third - Lab Calibration Certificate Available Introduction: It is designed according to IEC61032 figure ...
2024-12-09 18:22:24
|
|
1mm IP40 Test Probe Wire Equipped with 42V Electrical Indicator IEC60529 1. Standard of IP40 Test Probe Wire IEC61032 and IEC60529 etc. 2. Test Sample ...
2024-12-09 18:53:22
|
|
... against access to hazardous parts. The jointed test finger is also used to verfiy the protection against access with a finger. It is design ...
2026-06-28 00:15:53
|