31 - 40 of 109
ul articulated finger probe
Selling leads
|
... access to hazardous parts by children of more than 36 months and less than 14 years 3. Application range: Accessible enclosure live parts or ...
2024-12-09 19:16:17
|
|
IEC61010-1 Clause 6.2.2 Figure B.2 Jointed Finger Probe 1. Introduction The Test Probe B, named as Jointed finger Probe, is designed according to the ...
2026-06-28 00:15:53
|
|
...Finger Probe Test Probe C Test Rod for IP3X Testing 1. Introduction of Test Probe C: Designed according to IC61032 figure 3, meet the requirements ...
2026-06-28 00:15:53
|
|
IEC61010-1 Clause 6.2.1 Annex B Figure B.1 Rigid Finger Probe 1. Introduction Test probe 11, commonly known as the Rigid Test Finger, is designed ...
2025-04-27 00:06:27
|
|
...Probe 12 Cylindrical Pin Conforms to IEC61032 Accessability Test Finger Probe Introduction: It is designed according to IEC61032 figure 8. This pin ...
2024-12-09 18:22:24
|
|
... probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access ...
2026-01-04 13:27:38
|
|
... finger nail probe is mainly used for shocking or the non-removable parts of contacting with moving parts to determine whether it can withstand the ...
2024-12-09 18:22:24
|
|
Test Probe 13 Conincal Pin Conforms to IEC61032 Accessability Test Finger Probe Introduction: It is designed according to IEC61032 figure 9. The pin ...
2024-12-09 18:22:24
|
|
...accessbility to hazardous parts of electrical and electronic devices. This probe is widely refered by IEC60335-1, IEC62368-1, IEC60598-1 and other ...
2025-09-29 00:17:29
|
|
... in 90 degrees and made by insulating material, the handle can customized with terminals or M6 threaded hole to work with force gauge. Jointed test ...
2024-12-09 18:49:48
|