51 - 60 of 115
ul1310 test finger probe
Selling leads
|
...simulate access to hazardous parts by children of more than 36 months and less than 14 years. Specification of Small Child Finger Probe: Diameter ...
2025-07-30 00:07:26
|
|
... Finger Probe would be difficult. The Unjointed Finger Probe meets IEC 61032 requirements, Figure 7, Test Probe 11.The Finger Probe may be used to ...
2025-07-30 00:07:26
|
|
...accessbility to hazardous parts of electrical and electronic devices. This probe is widely refered by IEC60335-1, IEC62368-1, IEC60598-1 and other ...
2025-06-21 00:12:34
|
|
... is mainly used for the puncture-proof test of the accessible part of the solid insulation, also it is used to test whether the non-removable parts ...
2024-12-09 18:35:34
|
|
Portable Analog Force Gauge Pull - Push Gauge for Test Finger Probe 1.Feature ● High resolution: 1/200 scaleplate ● Hand-held equipment with small ...
2024-12-09 18:22:24
|
|
IEC61032 Test Finger Probe 2 Diameter 12.5mm Steel Sphere with CNAS Certificate Handle Available 1. Introduction of 12.5mm Steel Sphere: The 12.5mm ...
2024-12-09 18:22:24
|
|
... clause 8.1, IEC61010-1 clause 6.2.2 and Figure B.1, IEC60884-1 clause 10.1, AS/NZS3112 clause 3.14.12.4 and Appendix K3 requirements. It is used ...
2025-04-27 00:06:27
|
|
...Test Finger Probe with Third-lab Calibration Certificate 1. Introduction The IP code test probes are designed accoring to IEC60529 and IEC61032 ...
2025-07-30 00:07:26
|
|
IEC61010-1 Clause 6.2.2 Figure B.2 Jointed Finger Probe 1. Introduction The Test Probe B, named as Jointed finger Probe, is designed according to the ...
2025-07-30 00:07:26
|
|
Test Bar Probe 43 Person Against Access to Hot or Glowing Parts Introduction: It is designed according to IEC61032 figure 17. This bar is intended to ...
2024-12-09 18:22:24
|