31 - 40 of 115
ul1310 test finger probe
Selling leads
|
...Test Probe with CNAS Calibration Certificate Standards This telecom test probe is designed according to the standard of IEC60950, IEC60065, ...
2025-07-29 00:07:19
|
|
...Probe with 4N Force for Satety Testing 1. Standard of Surface Temperature Probe: IEC60335 2.Application of Surface Temperature Probe: The surface ...
2024-12-09 18:48:07
|
|
..., instead of the non-circular face. The probe is designed to meet the test requirements of IEC60335-1 clause 20.2, it is applied to verify the ...
2025-07-29 00:07:19
|
|
...Test Probe 32 Test Rod with Third - Lab Calibration Certificate Introduction: It is designed according to IEC61032 figure 15. This rod is intended ...
2024-12-09 18:22:24
|
|
...IEC6335-2-6. It’s mainly used to test the temperature rise of the front and side of the cooker, oven and tumble dryers, 4N force is applied ...
2024-12-09 19:00:19
|
|
IEC60065 Test Hook for Audio and Video Made by 304 Stainless Steel 1. Introduction The test hook is designed according to IEC60065 clause 9.1.7 and ...
2024-12-09 18:39:54
|
|
IEC60529 Stainless Steel 2.5mm Test Rod for IP3 and suffix C code Test Introduction: The 2.5mm Test Rod is used to verify the protection of persons ...
2024-12-09 18:42:57
|
|
IEC60529 1.0mm Test Wire used for IP4 Code Test with Calibrated Certificate Introduction: Used to verify the protection of persons against access to ...
2024-12-09 18:42:57
|
|
Steel Test Pin with Nylon Handle as Per BS1363-1 Figure 1 1. Introduction The test pin meets the requirements of BS1363-1 clause 12.6.1 and figure 1...
2024-12-09 21:43:55
|
|
Abration Resistance Test Pin Made by Hardened Steel Conforms to IEC60950 1. Introduction The scratch resistance test uses a hardened steel pin for ...
2024-12-09 18:54:54
|