61 - 70 of 72
socket outlet compression test apparatus
Selling leads
|
... clause 2.13.12.2 and figure 2.2, BS1363-1 clause 19.5 and figure 18. It is widely used in power cord bending and swing testing on power cords, ...
2025-07-10 00:09:19
|
|
Maximum and Minimum Withdrawal Force Testing Equipment for BS Socket-Outlet 1. Introduction Maximum and minimum withdrawal force testing equipment is ...
2024-12-09 19:46:14
|
|
...key switch, plug, socket-outlet and coupler of household appliance and similar appliance. Its aim at checking the switch whether is able to ...
2024-12-09 18:22:24
|
|
Test Bar and Test Wire According to IEC61032 Test Probes 14 and 17 Made by Metal and Nylon 1. Test Probe 14 Introduction: Test probe 14 (Test bar : 3...
2024-12-09 18:35:34
|
|
...be used to test the EV socket-outlets and vehicle connectors, it's strictly designed according to IEC61032 figure 2, and meets the requirements of ...
2024-12-09 23:54:34
|
|
... to check the mechanical strength of non-solid pins of plugs and portable socket-outlets. A force of 100N is exerted on the pin which is supported ...
2025-07-10 00:09:19
|
|
...31clause 5.3/figure A.1, IEC60320-1 clause 23.2, IEC60598-1 clause 4.13.5, IEC60884-1 clause 24.2 for repeat free fall test. The free fall test is ...
2025-01-09 00:03:09
|
|
...mechanical strength of non-solid pins of plugs and portable socket-outlets. A force of 100N is exerted on the pin which is supported as shown in ...
2024-12-09 20:13:10
|
|
Accessability Test Finger Probe 14 Test Bar Conforms to IEC61032 with CNAS Certificate Introduction: It’s designed according to IEC61032 Figure 10. ...
2024-12-09 18:22:24
|
|
...Test 1. Introduction The rotating barrel also called as tumbling barrel is designed according to IEC60068-2-31clause 5.3/figure A.1, IEC60598-1 ...
2025-07-10 00:09:19
|