100N 4.8mm Rod IEC60884-1 Plug Socket Tester Non Solid
|
IEC60884-1 figure 14 Non-Solid Pins Tester / Device for Testing Non-Solid Pins
1. Introduction The non-solid pin tester is designed according to IEC60884-1 figure 14. It is applied to check the mechanical strength of non-solid pins of plugs and portable socket-outlets.
A force of 100N is exerted on the pin which is supported as shown in IEC60884-1 figure 14, for 1min in a direction perpendicular to the axis of the pin, by mean of a steel rod have a diameter of 4.8mm, the axis of which is also perpendicular to the axis of the pin. During the application of the force, the reduction of the dimension of the pin at the point where the force is applied shall not exceed 0.15mm. After removal of the rod, the dimensions of the pin shall not have changed by more than 0.06mm in any direction.
2. Specification
3. Figure
|
||||||
Product Tags: 4.8mm Rod Plug Socket Tester IEC60884-1 Plug Socket Tester 100N Non Solid Pins Tester |
![]() |
IEC60884-1 Figure 20 Apparatus For Cord Retention Testing |
![]() |
IEC60320-1 Appliance Couplers Maximum And Minimum Withdrawal Force Testing Equipment |
![]() |
IEC 60884-1 Figure 14 Device for Testing Non-Solid Pins to Verify the Mechanical Strength |
![]() |
High Temperature Pressure Test Apparatus Plug Pins IEC60884-1 Figure 41 With Insulating Sleeves |
![]() |
Test Plug for Temperature Rise of BS Socket-Outlets as Per BS1363-2 figure 30 |
![]() |
Apparatus for Mechanical Strength Test on Resilient Covers BS1363-1 Figure 2 for Plug and Socket Tester |