21 - 30 of 182
plug compression test apparatus
Selling leads
...Testing Equipment IEC60320-1 Power Cord Anchorage Torque Test Apparatus with Diameter 100mm Torque Disk 1. Introduction Cord anchorage torque test ...
2025-01-11 00:05:11
|
... of connectors and appliance outlets have sufficient mechanical strength. A lateral pull force in parallel with the engagement face, is applied to ...
2025-06-21 00:12:34
|
2J Below Pendulum Impact Test Apparatus with 150g Impact Element 12 Month Warranty 1. Introduction The pendulum impact test apparatus is Low energy ...
2024-12-09 18:49:48
|
...Test Apparatus PLC Control 1. Introduction Power cord flexing test apparatus is designed according to IEC60335-1 clause 25.14 and figure 8, ...
2025-07-10 00:09:19
|
...Test Apparatus 220V/50Hz 1. Introduction This device is manufactured according to the IEC60884-1 clause 23.2 figure 20. It is used to check the ...
2024-12-09 19:45:42
|
...Test Apparatus for Testing Socket-Outlet and Switches 1. Introduction the IK01 to IK06 pendulum hammer test apparatus is for the test of energies ...
2024-12-09 20:28:11
|
...Test Apparatus 220V/50Hz 1. Introduction The tracking index test apparatus is controlled by single chip and push buttons. The test apparatus is ...
2024-12-09 19:02:52
|
... (equivalent EN62262), and can meet the test requirements of IEC60598, EN50102, the equipment is mainly consisted by test rig, swing rod and ...
2025-07-10 00:09:19
|
...Test Apparatus for Testing Flame Resistance of Flexing Parts 1. Introduction The spark ignition test apparatus meets the requirements of IEC60335-2...
2024-12-09 20:30:55
|
....4.2 and figure 7, DIN72551-5, QC/T-730, JASO D611-94 and VW60306 for testing the auto cables resistance to scrape abrasion. The apparatus ...
2024-12-09 23:41:36
|