161 - 170 of 178
pin bending test apparatus
Selling leads
|
... can meet the test requirements of IEC60598, EN50102. This equipment is for IK07 to IK20 testing, it is mainly consisted by striking elements (2J, ...
2024-12-09 19:58:25
|
|
... Horizontal Flammability Test Equipment FMVSS302 1. Introduction Interior material of vehicle horizontal flammability test apparatus can meet the ...
2024-12-09 19:36:23
|
|
...13 amp Plug Socket Outlet Tester 12 Months Warranty 1. Introduction The plug and Socket oulet test pin, test gauges and test apparatus are ...
2024-12-09 18:49:16
|
|
...Apparatus for Direct Plug-In Equipment with Different Adaptors According to IEC60065 1. Introduction The torque tester apparatus is designed ...
2024-12-09 18:28:53
|
|
...Single Operated 0.14J / IK01 Spring Hammer Impact Test Apparatus 1. Introduction This spring hammer can meet the requirement of IEC60068-2-75 and ...
2025-07-30 00:07:26
|
|
IK08 5J Spring Hammer Test Apparatus According to IEC60068-2-75 Introduction: IK ratings are defined as IKXX, XX is a number from 00 to 10 which ...
2024-12-09 18:22:24
|
|
..., GB4706.1 and TMD 3628-92. It is applied to evaluate the leakage resistance (CTI and PTI) of the surface of insulating material. Tracking index ...
2024-12-09 18:34:35
|
|
...head (5mm) is made of platinum, the other parts is made of brass, the platinum electrode should be equip with tracking index test apparatus 2. ...
2024-12-09 18:55:12
|
|
... and finalize the design. The oven is consisted by working room, air supply device, Japanese control system, and protection system. Work with the ...
2024-12-09 20:53:35
|
|
Plug Torque Test Device (plug-in Test Apparatus) 1. Introduction Plug torque test device is designed according to IEC60065 figure 11, it is applied to ...
2024-12-09 18:22:24
|