11 - 20 of 98
mechanical withdrawal force testing equipment
Selling leads
|
Automatic Cord Reel Test Equipment for Household Appliance IEC60335-1 1. Test principle: Two-Thirds of the length of the cord is unreeled. If the ...
2024-12-09 20:05:20
|
|
... to check the mechanical strength of non-solid pins of appliance inlet / plug connector. A force of 100N is exerted on the pin which is supported ...
2025-07-27 00:07:54
|
|
IEC60598-1 Clause 4.14.1 Test C Rigid Suspension Brackets Test Device 1. Introduction The test device is designed to meet the test requirement of ...
2024-12-09 20:28:11
|
|
...Test Equipment for Insulation Film Mandrel / Mechanical Strength and Abrasion Test 1. Introduction of Mandrel Test Equipment Mandrel Test Equipment ...
2024-12-09 18:47:52
|
|
...Test Equipment Mandrel Test Device equipped with 150N load 1. Introduction Mandrel tester device is designed and manufactured in accordance with ...
2024-12-09 18:22:24
|
|
...Test Equipment for Medical Equipment 1. Introduction The handle strength test apparatus is designed to meet the test requirement of to IEC60236-1...
2024-12-09 20:33:12
|
|
... the requirement of IEC62262, IEC60598, EN50102, GB2423.55-2006, GB20138-2006 and etc. It is apply to sheet metal, household appliance, luminaire ...
2024-12-09 18:54:37
|
|
IEC61032 Test Probe C for IP3X / Test Rod with Handle 0~3N Force Applied 1. Introduction of Test Probe C: Test probe C (test rod) Designed according ...
2025-07-27 00:07:54
|
|
IEC62262 IK Mechanical Impact Test Equipment with 2J to 20J Stainless Steel Pendulum Impact Hammers 1. Introduction IK pendulum hammer is designed ...
2024-12-09 18:45:16
|
|
IEC61032 Test Probe D for IP4X / Test Wire with Nylon Handle 1N Force Applied 1. Introduction of Test Probe D: Test probe D (Test wire: Φ1.0 wire...
2025-07-27 00:07:54
|