Mandrel Electrical Safety Test Equipment 230 Degree Rotating Angle With 150N Load
|
Detailed Product Description
|
IEC61558 Electrical Safety Test Equipment Mandrel Test Device equipped with 150N load
1. Introduction Mandrel tester device is designed and manufactured in accordance with the standard requirements of IEC61558 and IEC60065. It is used for the insulating thin layer of the power transformer and supply unit as well as the similar products to do the spindle test, mechanical strength test and abrasion test. This test device will have a mechanical limit in the position of 10o and 230o to make sure the accuracy of the testing angle. Thus, the operation method is simpler. The weights are with suspension loop to prevent the sample from damage due to the large stress.
2. Technical parameters
3. Figures |
||||||||||
| Product Tags: hipot test equipment electrical testing instruments |
Related Products
|
Brass Electrodes Dielectric Strength Tester UL1310 12KV For Insulating Material |
|
IEC60065 Electrical Safety Test Equipment Thin Layer Insulation Material Dielectric Strength Test |
|
UL1310 Dielectric Strength Test Equipment For Thin Layer Insulation Material |
|
IEC62196-1 Clause 26.4 EV Plug And Vehicle Connector Cable Bending Test Apparatus For Flexing Test |
|
IEC60335-1 Figure 8 Two Stations Supply Cord Flexing Test Apparatus PLC Control |
|
PLC Control Power Cord Flexing Test Equipment According To IEC60335-1 |
Email to this supplier