1 - 10 of 72
luminaire adjusting bending test equipment
Selling leads
|
Bending Test Equipment for Adjusting Luminaire Conforms to IEC60598-1 Clause 4.14.3 1. Introduction The bending test equipment for adjusting luminaire ...
2024-12-09 20:50:30
|
|
... the conditions of vertically dripping and dripping with 15 degrees tilted, and then to check if the products ( electronics, luminaire, electric ...
2024-12-09 18:28:01
|
|
IEC60598-1 Clause 4.14.1 Test A Luminaire Suspending Test Device 1. Introduction The luminaire suspending test device is for the load performance ...
2024-12-09 20:28:11
|
|
Adjustable Spring Impact Hammer for IK02 to IK06 Testing According to IEC60068-2-75 1. Introduction: The spring hammer test apparatus is completed ...
2025-07-14 00:08:55
|
|
... test equipment is designed to meet the test requirements of of IEC60598-2-13 clause 13.6.1 and 13.6.2. It is applied for recessed luminaires to ...
2024-12-09 21:48:21
|
|
...Testing Equipment Power Cord Bending Test Apparatus with 16A Output Current 1. Introduction Power cord bending test apparatus designs to meet the ...
2025-07-14 00:08:55
|
|
...Test Equipment 45 Degrees Purling Device for luminaire Introduction Strictly designed according to UL60507-ENGL1999 figure 38.1 and 38.2, ANSIZ21...
2024-12-09 18:22:24
|
|
IEC60598-2-13 figure 13.6.2.1 Ground Recessed Luminaires Torque Load Test Apparatus 1. Introduction The ground recessed luminaires torque load test ...
2024-12-09 21:48:21
|
|
..., and can meet the requirement of IEC62262, IEC60598, EN50102, GB2423.55-2006, GB20138-2006 and etc. It is apply to sheet metal, household ...
2024-12-09 18:54:37
|
|
IEC60529 IP Water Ingress Protection Test Equipment for Luminaire and Electronic Appliance 1. Introduction IP code is a system to indicates the ...
2024-12-09 18:48:25
|