31 - 40 of 72
luminaire adjusting bending test equipment
Selling leads
|
IEC62560 Bending Moment Test Device for Testing the Lamp at Lampholder 1. Introduction The bending moment test device is applied to test the bending ...
2024-12-09 20:34:26
|
|
... 21, AS/NZS3112 clause 2.13.12.2 and figure 2.2, BS1363-1 clause 19.5 and figure 18. It is widely used in power cord bending and swing testing on ...
2025-07-18 00:09:18
|
|
...-4-4. The electrical fast transient/ burst generator is to simulate the electrical fast transient or burst, the repetitive fast transient test is a ...
2024-12-09 18:34:35
|
|
..., luminaire, electric components and auto parts under the conditions of spraying water and splashing water, and then to check if they can meet the ...
2024-12-09 18:22:24
|
|
...IEC60335-2-17 clause 21.111.1 and figure 110, it is mainly used for flexing test of heating elements and internal wiring of electric blanket, and ...
2024-12-09 20:30:55
|
|
...Test Equipment Inclined Plane Device 1. Description of Inclined Plane Device: This inclined plane device is designed and manufactured in accordance ...
2024-12-09 18:22:24
|
|
IEC60529 IP Sets for IPX1 and IPX2 Wall - Mounting Type Drip Box for Electronics IPX1-2 Drip Box (Wall-Mounting type) Introduction: IPX1-2 Drip Box is ...
2024-12-09 18:22:24
|
|
Hand-Held Blue Light Hazard Tester Conforms to CIES 009/E:2002 1. Introduction The blue light hazard tester adopts CCD long focal length and wide ...
2024-12-09 18:42:24
|
|
IEC60598-1 Clause 4.14.1 Test C Rigid Suspension Brackets Test Device 1. Introduction The test device is designed to meet the test requirement of ...
2024-12-09 20:28:11
|
|
Electronic Vertical Impact Testing Machine for 2J , 5J , 10J , and 20J Impact Testing 1. Standard of Vertical Impact Testing Machine: IEC 60068-2-75 ...
2024-12-09 18:47:52
|