141 - 150 of 200
insulating material test finger
Selling leads
...Test Apparatus for Testing Cable of Car 1. Introduction The auto cable sandpaper abrasion test apparatus meets the requirements of ISO6722-1 clause ...
2024-12-09 20:44:28
|
...Test Equipment for Adjusting Luminaire Conforms to IEC60598-1 Clause 4.14.3 1. Introduction The bending test equipment for adjusting luminaire is ...
2024-12-09 20:50:30
|
...-10, GB/T 5169.16, GB/T2408, Section 30.2 of IEC60335-1, Section 9.3.2 and Section 14.7 of IEC61010-1. It is widely applied in material testing of ...
2025-04-25 12:32:48
|
...Test Apparatus for Testing Pin-Insulating Seelves, Plug and Socket-Outlets 1. Introduction: Low temperature impact test apparatus is designed ...
2024-12-10 00:28:55
|
...-2011 clause 18, it’s used to test the lamp holder when normal use shall cause no excessive wear or other harmful effect. The lamp holder’s ...
2025-07-31 00:11:44
|
.... It is manufactured in accordance with the requirements of IEC60068-2-75, GB/T2423.55, IEC62262, and GB/T20138 standards. It is mainly used for ...
2025-04-25 12:32:45
|
...Test Equipment 1000℃ Glow Wire Test Apparatus 1. Introduction The glow wire test apparatus is designed according to IEC60695-2-10, UL746 and GB...
2024-12-09 18:22:24
|
...Testing Machine 1. Introduction The IK Pendulum Impact Testing Machine is an impact testing device for materials such as shells or glass. Pego make ...
2025-07-31 00:11:44
|
... other different fields, in order to get more accurate result, user can reset the acceleration of gravity as local, and match a suitable test stand ...
2024-12-09 18:55:28
|
IEC60529 IP Code Probes Test Probe A and Test Probe 2 / Test Spheres Φ50mm and Φ12.5mm 1. Introduction: IP code probe is a test probe to verify the ...
2024-12-09 19:16:17
|