51 - 60 of 219
impact test apparatus
Selling leads
|
...Testing Equipment IEC60320-1 Power Cord Anchorage Torque Test Apparatus with Diameter 100mm Torque Disk 1. Introduction Cord anchorage torque test ...
2025-01-11 00:05:11
|
|
...Test Apparatus Electrical Safety Test Equipment 1. Introduction of Needle Flame Test Apparatus: ZY-2 Needle flame tester is designed according to ...
2024-12-09 18:22:24
|
|
...Test Apparatus IEC60598-2-3 for Testing Lighting Fixture 1. Introduction The static wind-force test apparatus is designed to meet the test ...
2025-08-30 04:44:30
|
|
..., EN50102, GB2423.55-2006, GB20138-2006 and etc. It is apply to sheet metal for mechanical impact testing. The device can be adjusted back and ...
2024-12-09 18:22:24
|
|
... and UL2556, it is applied to test the resistance of a wire, cable or cord to the horizontal and vertical propagation of the flame (VTM, VW-1, FT-1 ...
2024-12-09 19:21:08
|
|
... of electronics products and household appliance according to IEC60587. The test uses liquid contaminants and inclined specimen to evaluate the ...
2024-12-09 20:06:23
|
|
...Test Equipment 1000℃ Glow Wire Test Apparatus 1. Introduction The glow wire test apparatus is designed according to IEC60695-2-10, UL746 and GB...
2024-12-09 18:22:24
|
|
... etc. the surface of the part to be tested is placed in the horizontal position and a steel ball of 5 mm diameter is pressed against the surface ...
2024-12-09 18:35:52
|
|
... Wire Ignition Test Apparatus /Fire Hazard Testing Equipment 1. Introduction The hot wire ignition test apparatus is designed according to the ...
2024-12-09 19:16:17
|
|
...-2-13, GB/T 5169.13, IEC62368-1 Section 6.3.1, IEC60598-1 Section 13.3.2, IEC60335-1 Section 30.1. It is widely used in material testing on lamps, ...
2025-04-25 12:32:49
|