51 - 60 of 142
iec60335 endurance testing machine
Selling leads
|
...-1 clause 21.2, a hardened steel pin is used as a electrode during the dielectric strength test. After the scracth test, the device should work ...
2024-12-09 21:57:15
|
|
... a standard required conditions for temperature rising test of electric appliance.The Black Test Corner is used for the measurement of the ...
2024-12-09 19:58:25
|
|
IEC60335-2-23 Device for Testing Helmet-Type Hairdryers Under Normal Operation 1. Introduction The device for testing helmet-type hairdryers is ...
2024-12-09 21:28:34
|
|
Test Finger Probe with 125mm Stop Meet the requirement of IEC60335-2-14 Introduction The test finger probe is designed according to IEC60335, GB4706.1...
2024-12-09 18:22:24
|
|
...Testing Equipment Meet IEC60335-1 Figure 7 with 50N Force 1. Standard of Fingernail Probe: IEC60335-1, GB4706.1-2005, & UL etc. 2. Application of ...
2024-12-09 18:48:07
|
|
...Test Equipment According to IEC60335-2-23 1.Introduction Power cord flexing test apparatus is designed according to GB4706.15 and IEC60335-2-23 ...
2024-12-09 18:48:07
|
|
IEC60335-2-2 Figure 102 Apparatus for testing the resistance to flexing of current-carrying hoses 1. Introduction This apparatus is designed according ...
2024-12-09 20:30:55
|
|
... with spillage protection to ensure that the connectors are not affected by liquids when installed in a rated voltage base according to the ...
2024-12-09 20:43:57
|
|
IEC60335-1 Clause 21.2 Scratch Test Pin Made of Hardened Steel 1. Introduction Hardened steel Pin is designed according to IEC60950 clause 2.10.8.4 ...
2024-12-09 18:47:52
|
|
... surface of the part to be tested is placed in the horizontal position and a steel ball of 5 mm diameter is pressed against the surface with a ...
2024-12-09 18:47:52
|