1 - 10 of 207
electrical safety testing simulated wall
Selling leads
|
... to test the load-bearing capacity of equipment brackets that are intended to be installed on walls or ceilings. 2. Standard IEC61010-1 Medical ...
2025-04-26 07:40:05
|
|
...Test Equipment for Electrostatic Immunity Test IEC61000-4-2 Diode Display 1. Introduction: The ESD simulator is also known as ESD gun, it is a hand...
2024-12-09 18:58:07
|
|
... required conditions for temperature rising test of electric appliance. The dimension and temperature measurement arrangement of test corner can be ...
2024-12-09 18:22:24
|
|
...IEC60335-1 clause 25.14/figure 8, VDE and UL standards. It is applied to do the bend test of power cord of small household appliance and lighting ...
2024-12-09 18:22:24
|
|
...Electrical Safety Test Equipment Dielectric StrengthTest Instrument 1. Introduction of dielectric strength test instrument Dielectric strength test ...
2025-07-23 00:08:27
|
|
...Electrical Safety Test Equipment 5~32A/10~600mΩ 1. Introduction Ground Resistance tester (earth resistance tester) is applied to test the ground ...
2024-12-09 18:39:18
|
|
...Electrical Safety Test Equipment Mandrel Test Device equipped with 150N load 1. Introduction Mandrel tester device is designed and manufactured in ...
2024-12-09 18:22:24
|
|
....1 of IEC60335-1, clause 8.6.2.2 and clause 8.6.5 of IEC62368-1, clause 4.13.4 of IEC60598-1, clause 9.4.2.1 of IEC60601-1, and clause 7.4 of ...
2025-04-27 00:06:27
|
|
... clause 8.8, GB9706.1-2007 clause 21, IEC60601-1:2020 clause 9.4.4, GB9706.1-2007 clause 21 and IEC61010-1 clause 7.5.2. It’s applied to test the ...
2025-04-27 00:06:27
|
|
...Electrical Safety Test Equipment for Withstand Voltage Testing 1. Introduction of Withstand Voltage Tester Withstand voltage tester is applied to ...
2024-12-09 18:22:24
|