101 - 110 of 207
electrical safety testing simulated wall
Selling leads
|
IEC60065 Mandrel Test Equipment for Insulation Film Mandrel / Mechanical Strength and Abrasion Test 1. Introduction of Mandrel Test Equipment Mandrel ...
2024-12-09 18:47:52
|
|
IEC60335-2-17 Figure 112 Spark Ignition Test Apparatus for Testing Flame Resistance of Flexing Parts 1. Introduction The spark ignition test apparatus ...
2024-12-09 20:30:55
|
|
ISO6722-1 Motor-Driven Scrape Abrasion Test Apparatus for Testing Auto Cables 1. Introduction The scrape abrasion test apparatus is designed to meet ...
2024-12-09 23:41:36
|
|
IEC62196-1 Clause 26.4 EV Plug and Vehicle Connector Cable Bending Test Apparatus for Flexing Test 1. Introduction of cable bending test apparatus ...
2025-07-31 00:11:44
|
|
Luminaire Short Circuit Protection Test Chain with Resistance Value of 2.5Ω/m±20% 1. Usage 1). The resitance value of the test chain should be checked ...
2024-12-09 18:50:48
|
|
5V / HB/ V-0/1/2 UL94 Vertical and Horizontal Flame Test Apparatus Lab Testing Equipment 1. Introduction of Flame test Apparatus Horizontal and ...
2024-12-09 19:02:52
|
|
IEC62560 Bending Moment Test Device for Testing the Lamp at Lampholder 1. Introduction The bending moment test device is applied to test the bending ...
2024-12-09 20:34:26
|
|
Dielectric Strength Test Device with 30N Loaded Hardened Steel Pin IEC60335-1 clause 21.2 1. Introduction The dielectric strength test device is ...
2024-12-09 21:57:15
|
|
IEC60335-1 clause 25.15 Power Cord Anchorage Pull Force and Torque Tester 1. Description The cord anchorage pull force and torque tester is designed ...
2024-12-09 19:26:03
|
|
0.1N.m to 0.425N.m Power Cord Anchorage Torque Test Equipment for Flexible Cable Conforms to IEC60884-1 and VDE0620 1. Introduction The power cord ...
2024-12-09 18:57:44
|