21 - 30 of 37
e40 test caps lamp gauge
Selling leads
|
...test postive and negative toruqe of the lampcap, the test range is from 0 to 10N.m. The digital torque meter equips with E27/E26, B22d, E14/E12, G5...
2025-07-15 00:08:42
|
|
...Gauge for E17 Lamp Cap Gague Conforms to IEC60061-3 Introduction: E14 lamp cap and lampholder gauges are designed according to IEC60061-3:2004, ...
2025-07-15 00:08:42
|
|
... displacement and diameter of the pins (dimensions A and D); - the length of the pins (dimensions F1 plus J); - the recess length and diameter of ...
2025-07-15 00:08:42
|
|
... be called to go / no go gauge. The structure and sharp (like thread waveform) of gauges for lamp cap and lampholder are calculated and optimized ...
2025-07-15 00:08:42
|
|
...Gauges for Lampholder Lampcap and Bases with CNAS Certificates 1. Introduction Lamp cap and Lampholder Gauges are designed according to IEC60061-3, ...
2025-07-15 00:08:42
|
|
...Gauges for Lampholder Lampcap and Bases with CNAS Certificates 1. Introduction Lamp cap and Lampholder Gauges are designed according to IEC60061-3, ...
2025-07-15 00:08:42
|
|
... according to sheets 7004-21 and 7004-27. b. Dimension X according to sheet 7005-20. c. The mechanical compatibility of the lampholder with respect ...
2025-07-15 00:08:42
|
|
IEC60061 - 3 G5 lamp Cap Gauge Go Not Go Gauge 7006 - 46A and 7006 -46 with CANS Certificate Go Gauge for Bi-pin Cap on Finished Lamps G5 (7006-46A-3) ...
2025-07-15 00:08:42
|
|
IEC60560-2 B15 and B22 Holder Torque Gauge for Torsion Resistance Testing 1. Introduction Meet the requirements of IEC60432-1 figure C.1 and IEC60560...
2025-07-15 00:08:42
|
|
... of the lampholder screw thread and dimension X shown on sheet 7005-20 Testing: it shall be possible to screw the gauge into the lampholder without ...
2025-07-15 00:08:42
|