1 - 10 of 96
15n security test device
Selling leads
|
... 20.12.4 figure 2 and GB7000.9 clause 11.3 figure 2. It’s applied for checking security of lampholder contacts in push-in lampholder of the ...
2024-12-09 20:33:12
|
|
... in push-in lampholder of lighting chains. Lampholder contacts in push-in lampholders shall be reliably secured in the lampholder body by mean ...
2024-12-09 20:33:12
|
|
...14.1 (test B), the test device is applied to assess whether the mechanical suspended device of rigid suspension luminaire has sufficient safety ...
2024-12-09 20:28:11
|
|
...-1 clause 21.2, a hardened steel pin is used as a electrode during the dielectric strength test. After the scracth test, the device should work ...
2024-12-09 21:57:15
|
|
... for the pull force test of clip-mounted luminaires. Test requirements: 1). A pull is applied on the cable without jerk for 1 min in the most ...
2024-12-09 20:28:11
|
|
... to test the bending moment and force moment of rigid suspension brackets under the effect of certain force. Test requirements: - For heavy-duty ...
2024-12-09 20:28:11
|
|
...) for fluorescent lamps according to IEC60598-1 clause 4.4.4. It is applied to assess the fixing device of lamhpolder should have adequate ...
2024-12-09 20:28:11
|
|
...14.2.6. Waterproof test simulates the condition of water jets and powerful water jets, which is mainly applied to electronic products, luminaire, ...
2025-07-17 00:10:03
|
|
... moment test for semi-luminaires. For the semi-luminaires intended for connection to Edison screw or bayonet lampholders the mass and effective ...
2024-12-09 20:28:11
|
|
... of the enclosure under test with oscillating tubes (R200-R1600), or the support of the enclosure may be moved up or down. The test is mainly apply ...
2025-07-17 00:10:03
|