11 - 20 of 69
10nm bending test machine
Selling leads
|
...Testing Machine for IPX3 and IPX4 Waterproof Testing 1. Introduction The IPX3 and IPX4 Ingress Protection Testing Machine, named as Oscillating ...
2025-07-24 00:11:45
|
|
...IEC60529, IEC60598-1 Section 9.2.9, and is suitable for waterproof testing of outdoor electrical and electronic products and lighting products ...
2025-04-25 12:32:47
|
|
...Testing Machine 1. Introduction The IPX7 Water Tank Ingress Protection Testing Machine is designed and manufactured according to IEC60529 clause 14...
2025-04-25 12:32:46
|
|
...Testing Machine 1. Introduction The IK Pendulum Impact Testing Machine is an impact testing device for materials such as shells or glass. Pego make ...
2025-07-24 00:11:45
|
|
... Withdraw Endurance Testing Machine is designed according to the standard of IEC60335-2-15:2005
2024-12-09 18:56:38
|
|
...Testing Machine 1. Introduction The automatic cord reel testing machine is designed according to IEC60335-1 clause 22.16. It is applied to check if ...
2024-12-09 19:51:33
|
|
... according to IEC60529 clause 14.2.9 figure 7, 8, 9 and 10, GB4208, DIN40050-9 and ISO20653 standard. The main function of the ipx9k ingress ...
2025-07-24 00:11:45
|
|
... of fabrics such as canvas, tarpaulin, tent cloth, rainproof cloth and etc. The sample to be tested is fixed at the clamp, and the sample is ...
2024-12-09 18:51:05
|
|
... of the EUT against salt-spray corrosion. Salt spray chamber is to simulate the climate near the sea, there are two kinds of test according to ...
2024-12-09 18:48:07
|
|
...Testing Machine Sand Dustproof Test Chamber for IP5X and IP6X Testing 1. Introduction: Dustproof test chamber is fully designed according to the ...
2024-12-09 19:40:08
|