IEC60529 Clause 14.2.7 IPX7 Water Tank Ingress Protection Testing Machine
|
IEC60529 Clause 14.2.7 IPX7 Water Tank Ingress Protection Testing Machine1. IntroductionThe IPX7 Water Tank Ingress Protection Testing Machine is designed and manufactured according to IEC60529 clause 14.2.7 and IEC60598-1, and is suitable for waterproof testing of outdoor electrical and electronic products and lighting products under water, and for waterproof testing of products by certification and testing agencies and manufacturers. The ipx7 water tank tester is made of stainless steel to make sure rustless for long time use, the waterproof test can help to judge the products’ performance, and provide the basis for design, improve and inspect. The water-level on enclosure requires 0.15m above top and 1m above bottom, duration of the test is 30min.
2. StandardIEC60529 Degrees of protection provided by enclosures (IP Code) clause 14.2.7 IEC60598-1 Luminaires - Part 1: General requirements and tests
3. Parameters
4. Figure
|
||||||||||||||||||||||||||||||||||||||||||
| Product Tags: Water Tank Ingress Protection Testing Machine IPX7 Ingress Protection Testing Machine | ||||||||||||||||||||||||||||||||||||||||||
|
Hole Diameter 0.5mm Aluminum Baffle IPX3/IPX4 Ingress Protection Testing Hand-Held Spray Nozzle IEC60529 Clause 14.2.3/14.2.4 |
|
IEC60529 Clause 14.2.9 Figure 10 IPX9K High Pressure and Temperature Water Jetting Ingress Protection Testing Machine |
|
IEC60529 Clause 14.2.3 and 14.2.4 Figure 4 Ingress Protection Testing Machine for IPX3 and IPX4 Waterproof Testing |
|
IEC60529 Ingress Protection Testing Machine for IPX1 and IPX2 Vertical Drip Test |
|
IPX5 and IPX6 Jet Nozzle Ingress Protection Testing Machine for IPX5 and IPX6 Testing Standards |
|
IEC61851-1 Standard Test Finger For Verifying Accessibility To Live Parts Of Vehicle Connector |