China Electrical Safety Test Equipment manufacturer
Pego Electronics (Yi Chun) Company Limited
Pego Electronics-Focus on developing and promoting IEC lab testing equipments
7
Home > Products > IP Testing Equipment >

IEC60529 Ingress Protection Testing Machine for IPX1 and IPX2 Vertical Drip Test

IEC60529 Ingress Protection Testing Machine for IPX1 and IPX2 Vertical Drip Test

Brand Name Pego
Model Number PG-IPX12C
Certification Third-Lab Calibration Certificate
Place of Origin China
Minimum Order Quantity 1 set
Price USD5000~USD8000
Payment Terms T/T, Western Union, MoneyGram
Delivery Time 30 working days
Packaging Details woodencase
Standard IEC60529
Nozzle diameter 0.4mm
Application LED Products
Product Name IPX12 Rain Drip Test Equipment
Delivery By vessel, air or others
Guarantee 1 year
Detailed Product Description

IEC60529 Ingress Protection Testing Machine for IPX1 and IPX2 Vertical Drip Test

 

1. Introduction

The IPX1 and IPX2 Ingress Protection Testing Machine is designed and manufactured according to IEC60529, IEC60598-1, GB4208, and GB7000.1 standards. It is suitable for the drip level waterproof test of outdoor electrical and electronic products, lighting products, and medical product shells. It is suitable for certification and testing agencies and manufacturers to conduct IPX1 and IPX2 waterproof inspections of products. This equipment uses PLC control, and a 7-inch color touch screen displays, controls, and sets the test program. Users can easily and simply reach the test conditions. The equipment is equipped with a precision glass rotor flowmeter, which controls the actual output flow through manual adjustment.

 

 

2. Standard

IEC60529 Degrees of protection provided by enclosures (IP Code) Figure 3

IEC60598-1 Luminaires - Part 1: General requirements and tests

ISO20653 Road Vehicles - Degrees of protection (IP-Code) - Protection of electrical equipment against foreign objects, water and access

 

3. Parameters

ModelIPX12B-800IPX12B-1000
Drip board size (mm)800*8001000*1000
Outer size (mm)1000*1000*2300 (L*W*H)1500*1200*2360 (L*W*H)
Diameter of turntableΦ500mmΦ600mm
Aperture of nozzleΦ0.4mm
Grid pattern20*20mm
Delivery rate1~3mm/min (±0.5mm/min)
Adjust modeManual adjustment
Lifting height of drip board800~1800mm (adjustable)
Max. load-bearing capacity of turntable50KG
Rotation speed of turntable1r/min (IPX1)
Tilt angle of turntable00 or 150 in 4 positions
Lifting height of turntablefixed
Test time0~999min
Protection deviceElectric leakage, hydropenia, short circuit
Working powerAC 220V/50Hz, 1KW (Live wire + neutral wire + protective ground wire)
Working conditions5℃~35℃ (temperature), ≤85% (R.H.), 86kPa~106kPa (pressure)
AccessoriesWater filter*1, test needle*100, brass needle holder*20, 3-core cable*1 (3m)
Water source

1). The user is required to configure a water source for the equipment at the installation site, with a water pressure not less than 0.2Mpa, and install a 4/8 inch faucet.

2). The faucet is not more than 2 meters away from the equipment

Requirement for the siteThe ground is level, the drainage is unobstructed, the ground and walls are waterproofed, and the floor drain or drainage ditch is set
Requirement for power switch

1). The user is required to configure the leakage protection air switch of the corresponding capacity for the equipment at the installation site, and this switch must be independent for the use of the equipment

2). It is forbidden to use knife switches or power sockets

3). The leakage protection air switch is not more than 2 meters away from the equipment

 

4. FAQ:

4.1 What parts does the ipx1 and ipx2 ingress protection testing machine consists of?

Pego: The ipx1 and ipx2 ingress protection testing machine consists of the control system, frame, drip board, needles, turntable, flowmeter and etc.

 

4.2 Will any replacement be deliveried together with the machine?

Pego: Yes, we have prepared extra 100pcs needle and one water filter for the machine.

 

4.3 Does the ipx1 and ipx2 ingress protection testing device have the air drying function?

Pego: Yes, the machine has the compressed air drying function. After the test is completed, the excess water in the drip box can be drained clean to avoid long-term accumulation of water and scaling to block the pinholes. But user need to provide the compressor themselves.

 

5. Figures

 

 

 

Product Tags: IPX2 Vertical Drip Test Machine   IEC60529 Vertical Drip Test Machine   IPX1 Vertical Drip Test Machine  
Related Products
Email to this supplier
 
From:
Enter your Email please.
To: Pego Electronics (Yi Chun) Company Limited
Subject:
Message:
Characters Remaining: (80/3000)