311 - 320 of 827 Selling leads
|
Three-Pin Test Plugs with Flat Pins 1. Introduction The three-pin test plugs with flat pins are designed according to AS/NZS3112 figure C1 and clauses ...
2025-06-21 07:30:57
|
|
Gauge for Two-Pin Flat-Pin Plugs with Parallel Pins for Verifying the Dimensions 1.Introduction Gauge for two-pin flat-pin plugs with parallel pins is ...
2025-06-21 07:30:57
|
|
Gauges for Three-Pin Flat-Pin Plugs for Dimension Verification as Per AS/NZS 3112 figure A1 1. Introduction The gauges for three-pin flat pin plugs ...
2025-06-21 07:30:57
|
|
Cover-Plates Test Apparatus 1. Introduction The cover-plates test apparatus meets the requirements of IEC60884-1 clause 24.14.2 figure 31 and IEC60669...
2025-06-21 07:30:57
|
|
IEC60669-1 Figure14 Gauge for Verification of The Outline of Covers 1. Introduction: The gauge is designed according to IEC60669-1clause 20.8 figure14...
2025-06-21 07:30:57
|
|
Appliance Couplers Lateral Pull Test Apparatus 1. Introduction The appliance couplers lateral pull test apparatus is designed to meet the test ...
2025-06-21 00:12:34
|
|
ASTM D5276 Packaging Double-wing Free-Fall Drop Tester 1. Introduction The double arm free-fall drop test equipment is used for simulating a free fall ...
2025-06-21 00:12:34
|
|
Standard Test Finger for Accessiblity Test 1. Introduction Standard test finger also be called as jointed test finger and test probe B, it is applied ...
2025-06-21 00:12:34
|
|
IEC61010-1 Clause 7.5.2 Electrical Safety Testing Grip Strength Testing Equipment 1. Introduction The grip strength testing equipment is designed to ...
2025-04-27 00:06:27
|
|
IEC61010-1 Clause 7.4 Electrical Safety Testing Circular Stability Testing Machine 1. Introduction The Stability Testing Machine is manufactured ...
2025-04-27 00:06:27
|