1 - 10 of 97
down hole test
Selling leads
|
...Hole Test Select Tester Valve NACE MR0175 Standard Rotating Section Test Brief of Select tester valve The select tester valve as the main tester ...
2024-12-09 18:07:41
|
|
...Hole & Slim Hole Well Testing Sleeve Type RD Sampler The rupture disk sampler / RD Sampler is the part of DST tool String. The RD sampler is ...
2024-12-09 20:40:05
|
|
... featured with compact structure is right-hand safety joint used in the DST working string. The VR safety joint is run in hole above the packer ...
2024-12-09 18:07:41
|
|
...Hole DST Tool Cased Hole Hydraulic Jar Test NACE MR0175 Introudction of Hydraulic Jar for open hole and cased hole The hydraulic jar is able to ...
2024-12-09 18:07:41
|
|
....Th MFE serves as a means to by-pass fluid through the packer when tight places are encountered while going in and coming out of the hole, and to ...
2024-12-09 18:07:41
|
|
... the control during the testing operation and evaluation of test recovery while providing additional information for reservoir analysis. The tool ...
2024-12-09 18:07:41
|
|
... in the hole. The valve is operated after it is stung into a permanent packer or after a retrievable packer is set. The TST Valve requires a ...
2024-12-09 22:13:23
|
|
... pressure to help to remove the stuck tools during the downhole testing operation. The hydraulic Jar is named Big John Jar in Halliburon as well. ...
2024-12-09 18:07:41
|
|
...Hole Drill Stem Test ToolsRound Mandrel Slip Joint DST Tool 3 7/8" Size Introduction of Round Mandrel Slip Joint 3 7/8" round mandrel slip joints ...
2024-12-09 18:07:41
|
|
... fluid and release pressure when string testing finished. Before the drain valve is run in hole, the ports in the sleeve of drain valve will be ...
2024-12-09 18:07:41
|