Pin Point Injection Packer RTTS PPI Packer Isolates Multiple Zones
Pin-Point Injection (PPI) Packer is used in drill stem testing
service to isolate multiple zones in a single trip. PPI packer
– a retrievable, treating, straddle packer that features a
space-out between packer elements. This space-out helps to ensure
that the maximum number of perforations within a long producing
interval can be broken down to accept stimulation fluids uniformly.
Once the entire zone has been broken down individually, a
large-scale treatment can be performed more effectively.
The PinPiont packer is a Halliburton packer, which is composed of
a straight J-slot drag block body. The collar locator can be run
either above or below the PPI packer if needed. The fluid passage
through the center of the bottom packer is closed off with the
retrievable plug or ball included in the conversion kit.
Technical Parameter of PPI packer
| 1 | Rubber element OD | 4.45 13#-20# |
| 2 | Driff gauge00 | 4.55”13#-20# |
| 3 | ID | 1.5” |
| 4 | Working Pressure | 10000psi |
| 5 | Internal pressure strength | 17110PSI |
| 6 | External pressure strength | 16138PSI |
| 7 | Tensile Strength | 1712251bs |
| 8 | Torque Strength | 82861b.ft |
| 9 | Temperature rating | -20F-400F |
| 10 | Service | NACE MR0175 |
| 11 | Connection Type | 2"UP TBG.Box-Pin |
| 12 | Casing Range | 5 1/2"13-20# |
Drill stem testing tools for cased hole, open hole and slim hole
are available as below
RTTS Serires: Full bore retrievable packer, full bore retrievable
circulating valve, full bore retrievable safety joint,
Tester Valve: downhole tester valve, select tester valve, LPR- N
Valve, Tubing String Tester Valve
Circulating valve: omni circulating valve, multi-cycle circulating
valve, RD Circulating valve, RD safety Circulating Valve, Hydraulic
Circulating Valve
Other DST string tools: hydraulic jar, vertical shock absorber,
radial shock absorber, RD safety circulating valve, high pressure
retrievable packer with bypass, CHAMP packer, IPO valve, sleeve
type drain valve, rupture disk sampler, super safety valve with
control panel, BOP safety valve for downhole operation and so on.
ZZ TOP Oil Tools Service
Strict quality control system
ZZ Top Oil Tools with the sub-factory certified by ISO is expert in
design and production of downhole well testing tools. All the
manufacture is strictly conformed with ISO system including Quality
Control Management, Environmental Management and Occupational
Health & Safety Management. For each downhole tools and each
parts, we make the trace-ability from the raw material till the
products. And any TPI inspection are available with us from SGS/BV/
TUV /DNV etc..
Continuous after sales service
ZZ TOP Oil Tools provides the prompt after-sales service to our
customers to guarantee your benefits. For the complete downhole
tools, we provide the free training in our factory, and if you need
the site instruction, we can appoint our technical engineer to your
site for the training.
Welcome to contact us for more information of the downhole tools!
