221 - 230 of 375
temperature shock test chamber
Selling leads
|
Product introduction: This test method is to ignite the sample in the combustion chamber, and the ignition source is the gas radiant plate and the ...
2026-06-21 00:07:59
|
|
...rating. Compliant with standards: Meets the requirements of UL94 and GB/T2408 test standards. GBT5169.1 Combustion chamber: The box body is larger ...
2026-06-21 00:08:00
|
|
... horizontally on a U-shaped bracket, ignite the free end of the sample with a specified height flame in the combustion chamber for 15 seconds, and ...
2026-06-21 00:08:00
|
|
...". Test method: the specimen is clamped horizontally on the U-shaped support, and after igniting the free end of the specimen with a flame of ...
2025-08-13 17:43:36
|
|
... voltage of 1.8/3kV or below in low temperature environment. 2. Comply with the standard: TICW1-2009 Torsion test method for torsional flexible ...
2026-06-21 00:08:00
|
|
...Temperature Bending Resistance Testing Equipment Scope of application: Applicable to the assessment of the performance of circular cable or ...
2025-08-13 17:42:31
|
|
...Temperature Testing Equipment Description: The test method refers primarily to high-temperature insulations that applicable to hot-side temperature...
2025-08-13 17:48:39
|
|
...Temperature Impact Resistance Testing Equipment for Plastic Compliance with the standard: in line with GB5470-85, GB1682 test standards, applicable ...
2025-08-13 17:47:41
|
|
... of varnished wire, insulating cover and other plastics. The specimen is immersed in the test oil at the specified temperature, and the specimen is ...
2026-06-21 00:08:00
|
|
...Temperature Wire Winding Test Device Scope of application: Suitable for assessing and measuring the performance of circular cables or circular ...
2025-08-13 17:45:28
|