771 - 780 of 852
insulation material testing machine
Selling leads
|
Insulator Resistance To Electrical Tracking And Erosion Testing Machine IEC60587 Meet the standards: IEC60587: 1984 "Test Methods for Evaluating ...
2025-07-10 14:24:25
|
|
... on the epoxy resin insulating material using a high voltage of 3.5 kV AC with a frequency of 50 Hz causes the surface of the epoxy resin ...
2025-07-17 00:09:40
|
|
... at an angle. Attach a PVC film to the back of the sample to contact it. The damage is evaluated by recording the change of the PVC film after the ...
2024-12-09 17:30:39
|
|
Conductive and Compressive Heat Resistance Tester Product introduction: 1.1 This test method is used to measure the thermal-protective properties of ...
2025-07-17 00:09:40
|
|
...Testing Equipment High Power Wire And Cable Withstand Voltage Tester 1. Wire Testing Equipment USES: Suitable for high voltage test of motor, ...
2025-07-17 00:09:40
|
|
... Description: Applicable to a variety of wire and cable insulation coating materials, printed circuit board materials, IC insulation and other ...
2025-07-10 14:27:58
|
|
... of 50 Hz causes the surface of the epoxy resin insulating material to burn. Standard: IEC60587-2007 ASTMD2303 Parameters: Name DX8427 High Voltage ...
2025-07-17 00:09:40
|
|
... of electrical impingement on the epoxy resin insulating material using a high voltage of 3.5 kV AC with a frequency of 50 Hz causes the surface of ...
2025-07-17 00:09:40
|
|
... a specified volume of contaminated liquid (0.1% NH 4 CL) at a fixed height (35mm) for 30 seconds to evaluate the tolerance of the surface of solid ...
2025-07-17 00:09:41
|
|
...test of building components, and the fire resistance of load-bearing vertical separation components. Operating voltage: AC 380V±10% 50NZ. Furnace ...
2025-07-17 00:09:41
|