1, Applicable scope:
The leakage trace tester is a device that applies a certain voltage
between platinum electrodes of a specified size (2mm x 5mm) on the
surface of solid insulation materials, and drops a specified volume
of contaminated liquid (0.1% NH 4 CL) at a fixed height (35mm) for
30 seconds to evaluate the tolerance of the surface of solid
insulation materials under the combined action of electric field
and contaminated medium, and to determine its relative tracking
index (CTI) and resistance to tracking index (PTI).
Suitable for research, production, and quality inspection
departments of lighting equipment, low-voltage appliances,
household appliances, machine tool appliances, motors, electric
tools, electronic instruments, electrical instruments, and
information technology equipment, as well as insulation materials,
engineering plastics, electrical connectors, and accessory
industries.
2, Performance indicators
1. Studio volume: 0.5m3 (customizable)
2. Electrodes: Two rectangular platinum electrodes with a
cross-sectional area of 2mm x 5mm. One edge has a 30 degree slope.
Electrodes: Two rectangular platinum electrodes with a cross
sectional area of 2mm x 5mm One end edge is 30 ° bed
3. Electrode distance: 4.0mm ± 0.1
4. The force applied by the electrode to the surface of the sample
is 1.0N ± 0.5
5. Test voltage: 100V-600V can be set
6. Test power supply power: 2100W
7. When the short-circuit current is 1.0A, the decrease value at
600V voltage is ≤ 50V
8. Trace detection: If the current is 0.5A or greater for 2
seconds, cut off the power output
9. Dropping device:
The time interval for solution dripping is 30 seconds
Droplet height: 30-40mm
Droplet size: 20mm3~23mm3
Test solution
10. Equipped with force measuring device:
Dilute (0.1 ± 0.002)% mass fraction of ammonium chloride (NH4CZ)
with distilled water.
11. Test power supply: 220V, 50-60Hz.
