191 - 200 of 200
low density molybdenum plate
Selling leads
|
...-based alloy with a higher density than stainless steel. It is resistant to corrosion, abrasion and heat. It combines good mechanical properties ...
2025-08-01 00:10:00
|
|
... With a melting point of 2446°C and a boiling point of 4428°C, iridium is seen as one of the most unreactive and corrosion resistant materials ...
2025-08-01 00:10:00
|
|
... Round Bars information: Material: W50-90Cu10-50 Brand:W55Cu45,W60Cu40,W70Cu30, W75Cu25, W80Cu20, W85Cu15, W90Cu10 Density: 11.85g/cm3-16.75g/cm3 ...
2025-08-01 00:10:00
|
|
...: Sintering surface, Forged surface, Ground surface Applications forTungsten Copper Alloy Bar Because of the high electrical conductivity and low ...
2024-12-09 13:51:41
|
|
... high permeability and very high magnetic flux density. Compared with other magnetic alloys with low permeability in the same magnetic field range, ...
2024-12-09 17:43:30
|
|
... equipment requiring high permeability and very high magnetic flux density. Compared with other magnetic alloys with low permeability in the same ...
2024-12-09 17:45:15
|
|
...requiring high magnetic permeability and very high magnetic flux density. Compared with other low permeability magnetic alloys, in the same ...
2024-12-09 17:45:31
|
|
...-finished products, which are then molded and cut. They are characterized by high density, high melting point, small volume, high hardness, high ...
2024-12-10 00:03:57
|
|
... welding.the characteristics of Zirconium in filter industry the most practical, the Zirconium acid alkali resistance, resistance to high ...
2024-12-09 12:59:43
|
|
... Alloy Invar 36 Sheet Invar 36 Sheet, also known as Nickel Alloy 36 Plate, is a nickel-iron alloy noted for its uniquely low coefficient of ...
2024-12-09 12:59:43
|