W90Cu10 Copper Tungsten Round Bars Tungsten Copper Flat Bar Wire
Copper Tungsten Round Bars is Mainly used for EDM machining of carbide molds, high-speed steel
and switches and contacts in high and low voltage electrical
devices.
Copper Tungsten Round Bars information:
Material: W50-90Cu10-50
Brand:W55Cu45,W60Cu40,W70Cu30, W75Cu25, W80Cu20, W85Cu15, W90Cu10
Density: 11.85g/cm3-16.75g/cm3
Product standard: GB8320-87
WCu alloy rods size: dia(3.0-200mm)*L
WCu alloy foil size:
Thickness(0.08-0.7mm)*Width<120mm*Length<300mm
WCu Flatness tolerance:<4um
WCuRoughness:Ra1.6-Ra0.8
WCuSurface: polished, ground.
WCu alloy foil size:
Thickness(0.08-0.7mm)*Width<120mm*Length<300mm
WCu alloy sheet size see following attachment
Advantages of Copper Tungsten Round Bars
1. Better heat resistant;
2. Better ablate-resistant;
3. High intensity
4. High density;
5. Excellent thermal and electrical conductivity;
6. Easy to be machined.
Copper Tungsten Round Bars Picture:
| Code No. | Chemical Composition % | Mechanical properties |
| CU | Impurity | W | Density
(g/cm3 ) | Hardness
HB | RES
(cm) | Conductivity
IACS/ % | TRS/
Mpa |
| CuW50 | 50+/-2.0 | 0.5 | Balance | 11.85 | 115 | 3.2 | 54 | |
| CuW55 | 45+/-2.0 | 0.5 | Balance | 12.3 | 125 | 3.5 | 49 | |
| CuW60 | 40+/-2.0 | 0.5 | Balance | 12.75 | 140 | 3.7 | 47 | |
| CuW65 | 35+/-2.0 | 0.5 | Balance | 13.3 | 155 | 3.9 | 44 | |
| CuW70 | 30+/-2.0 | 0.5 | Balance | 13.8 | 175 | 4.1 | 42 | 790 |
| CuW75 | 25+/-2.0 | 0.5 | Balance | 14.5 | 195 | 4.5 | 38 | 885 |
| CuW80 | 20+/-2.0 | 0.5 | Balance | 15.15 | 220 | 5 | 34 | 980 |
| CuW85 | 15+/-2.0 | 0.5 | Balance | 15.9 | 240 | 5.7 | 30 | 1080 |
| CuW90 | 10+/-2.0 | 0.5 | Balance | 16.75 | 260 | 6.5 | 27 | 1160 |
