51 - 58 of 58
transformer no load measurement
Selling leads
|
Introduction: Electric Oil Withstand Voltage Tester is developed according to IEC156 Insulating Oil Dielectric Strength Testing Method. The oil test ...
2024-12-09 19:40:46
|
|
..., laboratory, etc. Dissipation Factor and Capacitance Tester is composed of a dielectric loss test bridge, a variable frequency power supply, a ...
2024-12-09 19:31:20
|
|
...load-bearing capacity and anti-wear performanceof lubricants (including oil film strength PB, sintering load PD, comprehensive wear value ZMZ, Long...
2025-07-17 00:14:13
|
|
... Wheel Bearings Introduction This Low Temperature Torque Tester is suitable for measuring the running performance of the grease in the specially ...
2025-07-17 00:14:13
|
|
Introduction Load the sample into the modified front wheel hub and shaft assembly, and let the hub and shaft run for a total of 360±5 min under the ...
2025-07-17 00:14:13
|
|
...er the dynamic load. Reference standards: GB/T5023 2-2008 Section 3.1; GB5013.2-2008 Section 3.1; IEC60227-2:2003; IEC 60245-2:2003 UL 1581 etc. ...
2025-07-17 00:14:13
|
|
...measure wear condition of aviation turbine fuel on friction steel surface. Test principle: put the test sample into the test oil pool, keep the ...
2024-12-09 21:07:43
|
|
...modified,automobile front wheel hub-spindle-bearing assembly.While the bearings are thrust-loaded to approximately 111N,the hub is rotated at 1000 ...
2024-12-09 21:21:35
|