ASTM D4693 Low Temperature Torque Tester For Grease Lubricated Wheel Bearings

Introduction

This Low Temperature Torque Tester is suitable for measuring the running performance of the grease in the specially manufactured, spring-loaded automobile wheel bearing assembly under low temperature conditions. The test principle is to fill the grease sample into a specially manufactured automobile wheel bearing assembly.The assembly is heated first, and then cold soaked at -40°C. In addition, other test temperatures can be set according to the requirements of the grease specifications. The spindle is rotated of 1r/min, and the torque value to prevent rotation of the hub is measured at 60 s.

Characteristic

◆ Standard inboard and outboard tapered roller bearings, LM67010-LM67048 and LM11949

◆ Microcomputer temperature controller, temperature control range from normal temperature to -50℃

◆ Pt100 temperature sensor, high acquisition accuracy ±0.5℃

◆ This Low Temperature Torque Tester adopts imported compressor cascade refrigeration, low noise.

◆ The drive motor adopts a high-speed ratio of 1740/1, which can maintain a stable speed.

◆ The low temperature box is insulated with special materials, and there is no temperature influence from the outside.

◆ Digital display torque value.

◆ The loaded spring can withstand a pressure of 500N and is equipped with a pressure calibration device.

◆ Digital display of working hours and alarm.

◆ A set of standard grease loader is supplied with Low Temperature Torque Tester.

Technical specifications