11 - 20 of 166
iec 60707 flame testing equipment
Selling leads
|
Product Introduction ISO 13506 est method uses the Manikin to be placed in a fire environment where the simulated heat flow, burning time and flame ...
2025-07-31 00:14:53
|
|
... flammability, burning rate, flame spread, burning flame retardancy. This machine has high degree of automation, and its test data is accurate. ...
2025-07-31 00:14:53
|
|
...Test Equipment Introduction: Fire-resistant cable refers to the cable that can keep a safe running time in the case of flame combustion. This Fire ...
2025-07-31 00:14:53
|
|
EN50339 Bunched Cable Vertical Flame Spread Tester BVC bunched cable vertical flame tester Introduction EN 50399 specifies the tester and methods of ...
2025-07-31 00:14:53
|
|
...Testing Equipment INTRODUCTION This cable fire resistance testing equipment to be used for testing cables required to maintain circuit integrity ...
2025-07-31 00:14:53
|
|
... refers to IEC60332-3 test.This wire and cable fire-resistant impact test equipment is designed according to IEC 60331-12 and BS6387 -2013 standard...
2024-12-09 19:27:37
|
|
... in the vertical position under opposed flow conditions, and a classification system based on the rate and extent of the spread of flame. It ...
2025-07-31 00:14:53
|
|
...Flame Spread Properties Test Equipment Introduction: Protective clothing flame spread properties test equipment is designed according to ISO 15025 ...
2025-07-31 00:14:53
|
|
... spread rate of flame, flame for ignition by distances, CFE (Critical Flux at Extinguishment) and total heat release. This test method is ...
2025-07-31 00:14:53
|
|
... flame from a specified burner is applied for 10 s to the surface or the bottom edge of textile specimens which are vertically oriented. Feature ...
2025-07-31 00:14:53
|