61 - 70 of 178
horizontal flame test chamber
Selling leads
|
... on the building surface. The opening of the combustion chamber at the bottom of the test model simulates the windows or openings of the floor in ...
2025-07-31 00:14:53
|
|
... property of the cable's insulating layer under abnormal conditions such as overheat and overcurrent.It can be used in vertical cable or fiber ...
2025-07-31 00:14:54
|
|
... test to determine the resistance of a single cable to a 1kW flame application. It conforms to IEC60332-1-2 (flame propagation) and IEC60332-1-3 ...
2025-07-31 00:14:54
|
|
...Flame Spread Properties Test Equipment Introduction: Protective clothing flame spread properties test equipment is designed according to ISO 15025 ...
2025-07-31 00:14:53
|
|
... spread rate of flame, flame for ignition by distances, CFE (Critical Flux at Extinguishment) and total heat release. This test method is ...
2025-07-31 00:14:53
|
|
...loss of light transmission in test chamber, it can measure smoke density of burning and decomposition of building material during test. Features: ...
2025-07-31 00:14:54
|
|
... above and impact the specimen,then observe the damage of inner and outer margins of isolation and sheath. This equipment should be used with AIC...
2025-07-31 00:14:53
|
|
... in test chamber, it can measure smoke density of burning and decomposition of building material during test. Features: The test chamber is Teflon ...
2025-07-31 00:14:54
|
|
... flame from a specified burner is applied for 10 s to the surface or the bottom edge of textile specimens which are vertically oriented. Feature ...
2025-07-31 00:14:53
|
|
... for the assessment of the performance of internal wall and ceiling linings. FEATURE Stainless steel support frame andCalcium silicate board ...
2025-07-31 00:14:53
|