31 - 40 of 155
flame spread test system
Selling leads
...Test Apparatus is designed and manufactured in accordance with DIN 53438 & ISO 11925-2 standard. It uses the German Kleinbrenner principle to ...
2025-07-10 00:13:09
|
...test for ignitability of products by direct flame impingement.The accuracy of the Ignitability tester meets the requirements of relevant standards ...
2025-07-10 00:13:09
|
...Tests for Flame Propagation of Textiles and Films. According to different fabric weight, divided into 1 methods and methods 2. Features: ...
2025-07-10 00:13:09
|
... property of the cable's insulating layer under abnormal conditions such as overheat and overcurrent.It can be used in vertical cable or fiber ...
2025-07-10 00:13:09
|
...the vertical position under opposed flow conditions, and a classification system based on the rate and extent of the spread of flame. It provides ...
2025-07-10 00:13:09
|
..., flame for ignition by distances, CFE (Critical Flux at Extinguishment) and total heat release. This test method is originated from ISO 5658-2 ...
2025-07-10 00:13:09
|
... in the vertical position under opposed flow conditions, and a classification system based on the rate and extent of the spread of flame. It ...
2025-07-10 00:13:09
|
...specimen) Flame Test. It can be used to test of 1060 products wire and cable FT1 and vertical burning test,1080 VW-1 test, 1061 test, 1090 ...
2025-07-10 00:13:09
|
...Flame Test Equipment Introduction This vertical horizontal wire flame test equipment (VW-1) is designed according to UL1581 sect 1080.1~1080.14, ...
2025-07-10 00:13:09
|
Solar Cell Spread of Flame & Burning Brand Test Equipment Introduction: This solar cell spread of flame and burnin brand test equipment is designed ...
2025-07-10 00:13:09
|