681 - 690 of 788
flame spread test equipment
Selling leads
|
Introduction The Drop Melting Point Apparatus is suitable for detecting the drop melting point of petroleum wax and grease. Characteristic 1. Water ...
2026-06-21 00:05:42
|
|
Introduction Coat the sample on a new bearing and run it for 60 seconds under a light thrust load to distribute the grease as it is used. The bearing ...
2026-06-21 00:05:42
|
ASTM D5481 Multicell Capillary Viscometer for 150℃ HTHS Apparent Viscosity with Computer Controlling
|
General Introduction This HTHS Dynamic Viscosity Tester determines the high-temperature high-shear (HTHS) apparent viscosity of engine oils using a ...
2026-03-15 00:28:15
|
|
General Introduction This Lubricating Oil HTHS Dynamic Viscosity Tester This instrument employs a multi-capillary viscometer equipped with pressure...
2026-03-15 00:28:15
|
|
Product Description The Fully Automatic Open Cup Flash Point Tester (GB/T 3536) is used to determine the open cup flash point and fire point of ...
2026-03-27 07:30:19
|
|
General Introduction This instrument is suitable to determine oxidation stability of unused hydrocarbon based insulating liquids under accelerated ...
2026-04-18 00:32:18
|
|
General Introduction This LPG density tester is designed and manufactured in strict accordance with ASTM D1657, ISO 3993 and SH/T 0221 standards. It ...
2026-05-21 00:38:21
|
|
Introduction: It is an important equipment for DC voltage withstand test and leakage current test of HV electrical equipment, cables, surge arresters ...
2026-05-24 18:45:03
|
|
... power equipment. The water content value of SF6 gas should be measured in route test. SF6 Dew Point and Micro water content Test set is applied to ...
2026-05-24 18:44:49
|
|
...Tester is designed and manufactured for electrical equipment very low frequency withstand voltage test. Very low frequency withstand voltage test ...
2026-06-21 00:05:42
|