1 - 10 of 676
flame spread test equipment
Selling leads
|
... spread rate of flame, flame for ignition by distances, CFE (Critical Flux at Extinguishment) and total heat release. This test method is ...
2025-07-29 00:09:47
|
|
... flame from a specified burner is applied for 10 s to the surface or the bottom edge of textile specimens which are vertically oriented. Feature ...
2025-07-29 00:09:47
|
|
... used in upholstered furniture. Meet CFR 1615/1616, ASTM D6413 and CALIF TB117. Features: ASTM D6413 Vertical Flame Spread Test Equipment uses ...
2025-07-29 00:09:47
|
|
...flame propagation test equipment is developed according to the French building materials and railway vehicle flame retardant test standard NF P92...
2025-07-29 00:09:47
|
|
... to simulate the textiles and films under risk of ignition to assume the flame spread performance . It is also suitable for the fabric material or ...
2025-07-29 00:09:47
|
|
...Flame Spread Testing Machine Introduction EN 50399 specifies the tester and methods of test for the assessment of vertical flame spread, heat ...
2024-12-09 19:27:37
|
|
... spread, heat release and smoke production of vertically-mounted bunched wires or cables, electrical or optical, under defined conditions. EN 50399 ...
2025-07-29 00:09:47
|
|
... that controls the heat flux, flame distribution and duration of the flame test manikin. The Instrumented Manikin Flame Engulfment Test Equipment ...
2025-07-29 00:09:47
|
|
...Flame Source Test Equipment SIT-T Ignitability Apparatus.pdf Introduction: This ignitability test equipment is designed according to ISO11925-2, it ...
2025-07-29 00:09:47
|
|
... boots and fire-protective gloves!Each set must be fitted a serial number of check marks with strong national fire equipment quality inspection ...
2025-07-29 00:09:47
|