731 - 740 of 827
fire performance testing equipment
Selling leads
|
Introduction: It is an important equipment for DC voltage withstand test and leakage current test of HV electrical equipment, cables, surge arresters ...
2026-08-31 15:48:36
|
|
... power equipment. The water content value of SF6 gas should be measured in route test. SF6 Dew Point and Micro water content Test set is applied to ...
2026-08-31 15:47:08
|
|
...Tester is designed and manufactured for electrical equipment very low frequency withstand voltage test. Very low frequency withstand voltage test ...
2026-10-23 00:06:26
|
|
.... Primary Current Injection Tester is a short-term or intermittent work device and characterized by small size, light weight, good performance, ...
2026-08-31 15:47:21
|
|
...tests of bare wires and metal wires, to detect their plastic deformation performance and failures in repeated bending. Test method: fix one end of ...
2024-12-09 21:54:49
|
|
... used with the sample cutter that equipped with dumbbell die. Standard: • GB/T 2951-2008 Technical parameters: • Max cutting width: 50mm • Cutting ...
2026-10-23 00:06:26
|
|
.... All the data and test results are showed on a 320*240 LCD. All the test results could be printed by the micro printer or saved on the storage of ...
2026-10-22 20:02:07
|
|
... and Volume Resistivity of insulating oil etc. This dielectric loss tangent meter is integrated with oil cup for dielectric loss, temperature...
2026-10-22 20:02:07
|
|
...tangent ( ) and capacitance of all kinds of high voltage electrical equipments on the spot of power plants, substations,laboratory, etc. The ...
2026-08-31 15:46:55
|
|
... equipment in power plants, substations, laboratory, etc. Dissipation Factor and Capacitance Tester is composed of a dielectric loss test bridge, a ...
2026-08-31 15:47:19
|